Dynacord PowerMate 1000-3 450W 10-Channel Powered Mixer

About: Dynacord PowerMate 1000-3 450W 10-Channel Powered Mixer

The PowerMate 1000-3 compact power mixers incorporate profound know‑how, based on our research, development and inter‑communication with our customers in the professional audio market, for decades.

It incorporates not less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface and power amplifier. Each of them is on the highest quality level as you would expect from a stand‑alone device. The PowerMate is a real all‑rounder for almost all applications with maximum feature set at minimum size.

The mixing section starts with 10 lowest noise, discrete microphone preamps. 6 auxiliary busses, two of them switchable pre/post fader, allow high flexibility for monitoring. The two effects processors offer 100 factory presets, including the already legendary PowerMate‑reverbs. Further, each preset can be edited and stored to 20 User memories.

The built in USB audio interface shares 4 playback and four recording channels simultaneously with a PC or Mac, following studio standard 24‑bit / 96 kHz. An additional MIDI interface allows integration of instruments, such as keyboards. A license for Steinbergs Cubase software is part of the package.

The 11 band stereo graphic equalizer can be routed flexible to master or monitor channels.

The amplifier is extremely powerful with 2 x 1000 W / 4 Ohms (RMS). Due to modern switching mode power supply technology and a class‑D output stage, it’s very efficient and lightweight, too. An optional speaker protection allows limitation of long‑term power without giving up dynamics.

Finally, the slim housing is protected by a rugged plastic lid with integrated handle for easy transportation.

• Intuitive mixer with 10 input channels (6 Mic/Line + 4 Mic/Stereo-Line)
• Very powerful and reliable amplifier with 2 x 1.000 Watts / 4 Ohms
• 2 High-Quality editable effects, 100 factory and 20 user presets
• Professional 4x4 24-bit / 96 kHz USB interface with MIDI
• Lightweight (14 kg) road-ready package with extra robust cover-lid

Specifications:

• Rated output power: into 4Ω: 2 x 900W; into 8Ω: 2 x 450W
• Signal-to-Noise Ratio (A-weighted): 105dB
• MIDI Interface 5-pin DIN connector, In / Out
• Effects: Type: 2x Stereo 24/48-bit multi effects processors; Effects presets: 100 Factory + 20 User, Tap-Delay; Remote control: Footswitch, MIDI
• Digital Audio Interface Channels: 4 In / 4 Out; AD/DA Conversion: 24-bit; Sampling Rate: 44.1 / 48 / 88.2 / 96kHz; PC Interface: USB2.0, Female Type B; Peak Display: 6 dB before Clip
• Height 164.5mm (6.48")
• Width 510.5mm (20.1")
• Depth 571.5mm (22.5")
• Weight Net 14kg (30.86 lbs)