Menu

Free shipping on most orders over $199!

Earthworks FlexWand FW730 Microphone w/ Boom Stand

Model: FW730

Earthworks FlexWand FW730 Microphone w/ Boom Stand
  • Free Shipping!
  • Usually Ships in 7-10 Days 
  • Not yet reviewed




About: Earthworks FlexWand FW730 Microphone w/ Boom Stand

The Earthworks FlexWand™ is a combination of a 30kHz High Definition Microphone™ and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 7 feet and as low as 1.5 feet from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand™ is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand™, position it and plug the mic cable into the base.

  • Uniform frequency response on or off axis
  • Frequency response of 30Hz to 30kHz
  • Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
  • Large flex section near the center of the stand that couples the stand and the wand
  • Mini-gooseneck between the end of the wand and the microphone head
  • Substantial improvement in gain before feedback
  • They will handle high sound pressure levels with high rejection of sounds to the rear of the microphone
  • Ideal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band or orchestra
  • The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
  • The sturdy 12 pound cast iron base will not allow the FlexWand™ to be accidentally knocked over

Specifications:

  • Frequency Response: 30Hz to 30kHz ±2dB at 6 inches (15cm)
  • Polar Pattern: Cardioid or Hypercardioid
  • Sensitivity: 20mV/Pa (-34dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 139dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 65Ω balanced (between pins 2 & 3)
  • Min Output Load: 600Ω between pins 2 & 3
  • Noise: 16dB SPL equivalent (A weighted)
  • Positioning Range: From 1.5 ft. to 7 ft. above floor level
  • Dimensions: Stand 7’ 2” long (2.18m), Base 12” (30.5cm) in diameter, (2.7cm) high
  • Color: Stand, flex & wand – black, base – dark gray
  • Weight: Stand 2 lbs. (.9 kg), Base 12.6 lbs. (5.7kg)

UPC: 827517000695

AVShop.ca is a Canadian authorized Earthworks retailer.

Reviews: Earthworks FlexWand FW730 Microphone w/ Boom Stand

There are currently no product reviews.


Warranty: Earthworks FlexWand FW730 Microphone w/ Boom Stand

AVShop.ca Warranty:

30 Days

Manufacturer's Warranty:

We view our products as creative tools and understand the importance of reliability in the field. Earthworks® provides a 15 year warranty on parts and labor for microphones, unless the unit is damaged by abuse or modification.

Earthworks, Inc. warrants this product to be free of defects in material and workmanship for a period of fifteen years from the date of original retail purchase. This warranty is enforceable only by the original retail purchaser. To be protected by this warranty, the purchaser must complete an online registration form within 30 days of purchase.

Preamplifiers are covered by a 2 year warranty, unless the unit is damaged by abuse or modification.

Accessories are covered by a 90 day warranty, unless the unit is damaged by abuse or modification. KickPads and LevelPads are covered by a 2 year warranty, unless the unit is damaged by abuse or modification.