COVID-19 Alert: Curb-side pick up is now available for orders placed in advance. Please wear a mask. Showroom is still closed. Orders may be delayed due to higher volumes.

Free shipping on most orders over $199!*

Shure BETA 27 Condenser Instrument Mic

Model: BETA27

Shure BETA 27 Condenser Instrument Mic
  • Free Shipping!
  •  Special Order - Usually Ships 3-4 Weeks 
  • Not yet reviewed

About: Shure BETA 27 Condenser Instrument Mic

The Beta 27 side-address condenser microphone is precision engineered for professional sound reinforcement and project studio recording applications. Its flat frequency response and low self-noise provide unerring performance in demanding environments. A tight supercardioid pattern ensures high gain-before-feedback and maximum isolation from other sound sources.

  • Supercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources
  • Tailored for superior transient response from a low-mass, 1” externally-biased, ultra-thin 24 Karat gold-layered Mylar® diaphragm
  • Flat, neutral frequency response for natural reproduction on stage or in the studio
  • 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended lowend
  • -15 dB switchable attenuator handles extremely high SPLs with ease
  • Premium electronic components and gold-plated internal and external connectors
  • Internal pop filter with three separate mesh layers reduces wind and breath noise.

Type: Condenser (externally biased)

Frequency Response: 20 to 20,000 Hz

Polar Pattern: Supercardioid

Impedance: 160 Ohm

Sensitivity (at 1 kHz, open circuit voltage):
- -37 dBV/Pa
- 1 Pascal=94 dB SPL

Maximum SPL (1 kHz at 1% THD):
- 1000 Ohm load: 134 dB (148 dB, Pad on)
- 2500 Ohm load: 140 dB (154 dB, Pad on)

Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz):
- 85.5 dB
- S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted

Dynamic Range (at 1 kHz):
- 1000 Ohm load: 125.5 dB
- 2500 Ohm load: 131.5 dB

Common Mode Rejection (20 Hz to 20 kHz): > 50 dB

Clipping Level (20Hz-20 kHz at 1% THD):
- 1000 Ohm load: 2.0 dBV
- 2500 Ohm load: 8.5 dBV
- THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL

Self-Noise (typical, equivalent SPL, A-weighted): 8.5 dB

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3

Weight: Net: 428 g (15.1 oz.)

- Attenuator: -15 dB
- Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz

Connector: Three-pin professional audio (XLR), male

Power Requirements: 48v DC phantom, 5.6 mA

UPC: 042406180375 is a Canadian authorized Shure retailer.

Videos: Shure BETA 27 Condenser Instrument Mic

Reviews: Shure BETA 27 Condenser Instrument Mic

There are currently no product reviews.

Warranty: Shure BETA 27 Condenser Instrument Mic Warranty:

30 Days

Manufacturer's Warranty:

2-year limited

Rechargeable batteries: 1-year limited