Free shipping on most orders over $199!*

DPA Microphones Unterminated Supercardioid Tabletop Microphones

Model: 4098-DL-D-BUT-045

DPA Microphones Unterminated Supercardioid Tabletop Microphones
DPA Microphones Unterminated Supercardioid Tabletop Microphones
  • Free Shipping!
  •  Special Order 
  • Not yet reviewed

More models to choose from:


About: DPA Microphones Unterminated Supercardioid Tabletop Microphones

A complete, supercardioid tabletop microphone solution, which is ideal for either permanently affixing to or temporarily placed on a table in conference venues, meeting rooms and board rooms. 
This solution can be scaled up as needed. In smaller rooms you might only need one microphone to capture the best sound. In larger settings, you can use multiple d:screet™ Supercardioid Tabletop Microphones to ensure each area of the room is completely covered. The best audio quality is obtained in a one-to-one solution – one microphone position close to one speaker.

Combined with d:screet™ SC4098

With very low noise and a high sensitivity, d:screet™ Supercardioid Tabletop Microphones offer the most clear, transparent, and natural sound available on the miniature mic market. They ensure maximum speech intelligibility regardless of the acoustical environment. With a linear response, low distortion and an extremely large dynamic range, they sound great in any environment.

The Microphone Base is made specifically to work with the d:screet™ SC4098 Supercardioid Podium Microphone. It has an elegant yet unobtrusive design with a black, non-reflective surface and integrated shock mount, which ensures that vibrations from people touching the table as well as reverberations from people walking in and out of the room will not affect the sound. The audio cables are an integral part of the Microphone Base unit. 

The standard tabletop solution is equipped with a 43 cm (17 in), black gooseneck and comes in three standard kits to meet your exact needs:

  • d:screet™ Tabletop Microphone, 43 cm (17 in), Black Unterminated, P48 (balanced)


  • Outstanding audio quality
  • Slim, elegant Scandinavian design
  • Highly directional – very isolated
  • High rejection of radio frequency interference
  • Meets the needs of architects, AV consultants, system integrators and installing electricians



  • Directional pattern: Supercardioid
  • Principle of operation: Pressure gradient
  • Cartridge type:Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, ± 2 dB, at 20 cm (7.9 in): MicroDot: 80 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz XLR-3M: 100 Hz - 15 kHz with 3 dB soft boost at 8-15 kHz and permanent 2nd order low-cut filter at 80 Hz
  • Sensitivity, nominal, ±3 dB at 1 kHz: 16 mV/Pa; -36 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 35 dB (max. 38 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 71 dB(A)
  • Total harmonic distortion (THD): < 1% up to 125 dB SPL peak
  • Dynamic range: Typ. 102 dB
  • Max. SPL, peak before clipping: 135 dB
  • Output impedance: From MicroDot: 30 - 40 Ω. From XLR connector or DAD6001 XLR Adapter: 100 Ω
  • Minimum load impedance: 2 kΩ
  • Cable drive capability: Up to 300 m (984 ft) with XLR connector or DAD6001 XLR Adapter
  • Output balance principle: Signal balanced with XLR connector og DAD6001 XLR Adapter
  • Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001 XLR Adapter
  • Power supply (for full performance): MicroDot:
    • Min. 5 V to max. 50 V through DPA adapter for wireless systems
    • XLR-3M: 48 V phantom power ±4 V (will work from 12 V)
    • Unterminated leads: 48 V phantom power ±4 V (will work from 12 V)
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 XLR Adapter
  • Connector: MicroDot, XLR-3M or Unterminated leads
  • Color: Black
  • Weight: 368 g (13.0 oz)
  • Microphone diameter: 10 mm (0.4 in)
  • Capsule diameter: 5.4 mm (0.21 in)
  • Microphone length: 43 cm (17 in)
  • Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on XLR connector or DAD6001 XLR adapter)
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH):Up to 90%
   is a Canadian authorized DPA Microphones retailer.

Reviews: DPA Microphones Unterminated Supercardioid Tabletop Microphones

There are currently no product reviews.

Warranty: DPA Microphones Unterminated Supercardioid Tabletop Microphones Warranty:

30 Days

Manufacturer's Warranty:

All DPA microphones are covered by warranty for a minimum of two years. Some of them come with a five-year warranty.

The five-year warranty is valid for the following microphones: The d:facto™ Vocal Microphone with the 4018V capsule and all d:dicate™ microphones except the 2006 and 2011.

The DPA warranty covers:

  • Only the microphone
  • Mechanical functionality
  • Documented specifications