COVID-19 Alert: Curb-side pick up is now available for orders placed in advance. Please wear a mask. Showroom is still closed. Orders may be delayed due to higher volumes.

Free shipping on most orders over $199!*

Studio Technologies Model 214 Announcers Console

Model: M214

Studio Technologies Model 214 Announcers Console
  • Free Shipping!
  • Not in-Stock: Estimated Lead Time 7-10 Days 
  • Not yet reviewed

About: Studio Technologies Model 214 Announcers Console

The Model 214 Announcer's Console is designed to serve as the audio control center for announcers, commentators, and production personnel. This tabletop unit supports applications utilizing the Dante® audio-over-Ethernet media networking technology. The Model 214 is suitable for numerous applications including on-air television sports broadcasting, stadium announce, and corporate AV. The unit integrates all on-air, talkback, and cue audio signal routing in one compact system. Two pushbutton switches allow the user to control the main and talkback audio output channels. Ease of use, configuration flexibility, and sonic excellence are some of the unit's highlights.

Key Features


  • Dante audio-over-Ethernet technology
  • Extensive feature configuration
  • Excellent audio quality
  • Main, talkback, and tally tone/hot mic audio outputs
  • Four headphone audio input channels
  • PoE and 12 Vdc powering
  • Headphone output with sidetone function
  • Rugged, compact enclosure
  • Configured using STcontroller application



Power Sources:
Power-over-Ethernet (PoE): class 2 (low power) per IEEE 802.3af
External: 10 to 18 Vdc, 270 mA max @ 12 Vdc

Network Audio Technology:
Type: Dante audio-over-Ethernet
AES67-2013 Support: yes
Dante Domain Manager (DDM) Support: yes
Bit Depth: up to 24
Sample Rates: 44.1 and 48 kHz
Number of Transmitter (Output) Channels: 3 (main, talkback, hot mic)
Number of Receiver (Input) Channels: 4
Dante Audio Flows: 4; 2 transmitter, 2 receiver
Analog to Digital Equivalence: a +4 dBu input with 0 dB gain selected results in a Dante digital output level of –20 dBFS

Network Interface:
Type: twisted-pair Ethernet, preferably with Power-over-Ethernet (PoE) support
Data Rate: 100 Mb/s (10 Mb/s Ethernet not supported)

General Audio Parameters:
Frequency Response: 20 Hz to 20 kHz, +0/–1 dB, mic input to Dante output
Distortion (THD+N): 0.004%, measured at 1 kHz, –36 dBu mic input, 40 dB gain (Dante output approx. –20 dBFS)
Dynamic Range: >109 dB, 40 dB gain, A-weighted

Microphone Input/Preamplifier:
Type: electronically balanced
Input Impedance: 3.7 k ohms
CMRR: >76 dB, 20 Hz to 20 kHz, 40 dB gain
Gain Range: 19 to 64 dB, adjustable in 3-dB steps
EIN: –123 dBu, 22 kHz bandwidth, 64 dB gain, 150 ohm source resistance
Compatibility: dynamic or phantom-powered mics
Phantom Power: 45 Vdc, nominal, meets IEC 61938 P48 standard
Remote Configuration Capability: microphone preamplifier gain and P48 power on/off status (uses STcontroller application)

Headphone Output:
Type: 2-channel (stereo)
Compatibility: intended for connection to stereo (dual-channel) or monaural (single-channel) headphones, headsets, or earpieces with nominal impedance of 50 ohms or greater
Maximum Output Voltage: 3.0 Vrms, 1 kHz, 150 ohm load
Frequency Response: 20 Hz to 20 kHz, ±1 dB
Dynamic Range: >109 dB, A-weighted
Level: adjustable using rotary level control

Tally Tone:
Use: provides support for call light activation on Studio Technologies' Model 391 Dante Alerting Unit
Type: sine wave, <0.01% THD+N
Level: –20 dBFS
Frequency: 20 kHz ± 0.1 Hz

Relay Contacts: 2
Functions: one each follows main and talkback pushbutton status
Contacts: form A (normally open, not shorted)
Rating: 100 mA, 60 V AC/DC, maximum
Contact Resistance: 16 ohms, maximum
Access: requires user-implemented connector scheme

Configuration: requires Studio Technologies' STcontroller software application, version 1.05.00 and later (STcontroller
compatible with Windows® version 7 and later)

Microphone Input: 3-pin female XLR
Headphone Output: ¼-inch 3-conductor jack
Ethernet: Neutrik etherCON RJ45
External DC: 4-pin male XLR
USB: type A receptacle

Spare Connector Locations: 2
Allows Studio Technologies' cable assemblies or option modules to be installed. Also compatible with Neutrik NC*D-L-1 connectors (*=3F, 3M, 5M, 6F, 6FS, etc.).

Dimensions (Overall):
5.6 inches wide (14.2 cm)
3.3 inches high (8.4 cm)
8.5 inches deep (21.6 cm)

Weight: 2.7 pounds (1.2 kg) is a Canadian authorized Studio Technologies retailer.

Reviews: Studio Technologies Model 214 Announcers Console

There are currently no product reviews.