COVID-19 Alert: Curb-side pick up is now available for orders placed in advance. Please wear a mask. Showroom is still closed. Orders may be delayed due to higher volumes.

Free shipping on most orders over $199!*

Studio Technologies Model 362 Listen-Only Beltpack

Model: M362

Studio Technologies Model 362 Listen-Only Beltpack
Studio Technologies Model 362 Listen-Only Beltpack
Studio Technologies Model 362 Listen-Only Beltpack
  • Free Shipping!
  • Not in-Stock: Estimated Lead Time 7-10 Days 
  • Not yet reviewed

About: Studio Technologies Model 362 Listen-Only Beltpack

The Model 362 Listen-Only Beltpack is a self-contained 2-channel user device that supports headphone monitoring of two audio channels associated with the Dante® audio-over-Ethernet media networking technology. Each Model 362 is intended to be used by one user, providing them with the form factor, reliability, and features needed to be effective in a variety of applications. It's expected that most applications will use multiple Model 362 units to support the individual audio monitoring needs of a group of users.

Key Features

  • Dante audio-over-Ethernet technology
  • Configurable audio channel routing
  • Dual level controls
  • Excellent audio quality
  • 1/4-inch and 3.5 mm output jacks
  • Power-over-Ethernet (PoE) powered


Power Source:
Power-over-Ethernet (PoE): class 1 (very low power, ≤3.84 watts)

Network Audio Technology:
Type: Dante audio-over-Ethernet
AES67-2013 Support: yes
Dante Domain Manager (DDM) Support: yes
Bit Depth: up to 24
Sample Rate: 44.1, 48, 88.2 and 96 kHz
Number of Receiver (Input) Channels: 2
Dante Audio Flows: 2 receiver

Network Interface:
Type: twisted-pair Ethernet, Power-over-Ethernet (PoE) supported
Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s "GigE" Ethernet not supported)

Headphone Output:
Type: Dual-channel
Compatibility: intended for connection to mono or stereo headsets or earpieces with nominal impedance of 50 ohms or greater
Maximum Output Voltage: 3.8 Vrms, 1 kHz, 150 ohm load
Frequency Response: 20 Hz to 20 kHz, –2 dB
Distortion (THD+N): <0.002%
Dynamic Range: >100 dB

Headphone Output: ¼-inch and 3.5 mm 3-conductor jacks
Ethernet: Neutrik etherCON RJ45

Dimensions (Overall):
3.1 inches wide (7.9 cm)
1.6 inches high (4.0 cm)
4.0 inches deep (10.2 cm)

Mounting: intended for portable applications; contains integral belt clip

Weight: 0.5 pounds (0.2 kg) is a Canadian authorized Studio Technologies retailer.

Reviews: Studio Technologies Model 362 Listen-Only Beltpack

There are currently no product reviews.