ETC ColorSource PAR (Deep Blue) - White

About: ETC ColorSource PAR (Deep Blue) - White

An LED luminaire crafted by lighting experts, the ColorSource PAR uses a balanced recipe of red, green, blue, a twist of lime, and an extra dash of red to provide a richness of color only possible from ETC LED luminaires. The extremely lightweight ColorSource PAR outputs bright, beautiful light, is easy to use with or without a lighting desk and lives up to ETC's high standards for quality.

Color Integrity

ColorSource luminaires are factory-calibrated to ensure consistency. They feature a four-color mixing system offering bright, vibrant colors and perfectly-mixed pastels.

The thermal management algorithms built into every ColorSource fixture ensure that the colors you choose in rehearsal are the colors you get during the show.

What's your angle?

Numerous diffusion and beam-shaping lenses options unlock ColorSource PAR’s potential. High backlight, low sidelight, pipe-end positions – you name it, ColorSource PAR will hit it just right.

Long, light life

ColorSource PAR has been independently tested using the LM-84 standard. These tests have confirmed what we knew from the beginning: ColorSource PAR is built to last! 55,000 hours. The math: if you ran a ColorSource PAR for three hours a day, seven days a week, all year long – we are talking about 50 years of light. That's a lot of beautifully-lit shows.

About the ColorSource Array options - Original vs. Deep Blue

Original ColorSource fixtures use an RGB-L array where the ‘B’ represents the use of blue LEDs. ColorSource Deep Blue replaces those blue LEDs with a deeper ‘Royal Blue’ (indigo) LED. How does this impact your color mixing? Please reference the color chart below.

Original ColorSource fixtures can reach any color within the dark shaded triangle while the ColorSource Deep Blue fixtures can reach any color within the light shaded triangle. While much of these areas overlap, there is a portion of each range that can only be reached by the respective color arrays (A=Original, B=Deep Blue).

SPECIFICATIONS

• SOURCE
  • 40 Lumileds LUXEON® Z LED
  • PAR: 3,039 Max lumens
  • PAR DB: 2,429 Max lumens
  • PAR: 28.1 Lumens per watt
  • PAR DB: 27.6 Lumens per watt
  • L70 rating (hours to 70% output): 55,000 hours*
• COLOR
  • PAR: red, green, blue, lime
  • PAR Deep Blue: red, green, indigo, lime
  • Color mixing
  • Calibrated array
  • No red shift
• OPTICAL
  • 14.5° (secondary lenses available for multiple beam-spread options)
  • Gate size: N/A
  • 7.5 in / 190 mm aperture size
  • No pattern projection
  • No pattern size
  • 1,200 Hz (default) and 25,000 Hz (via RDM)
• ELECTRICAL
  • 100-240 VAC 50/60 Hz
  • powerCON power in and thru
  • 35 A at 120 V (First half-cycle)
  • 49 A at 240 V (First half-cycle)
  • 9 fixtures (15 A power thru connector)
  • 10 fixtures (R20 module or similar)
  • 90 W at 120 V / 89 W at 240 V
  • 0.75 A at 120 V / 0.4 A at 240 V
• THERMAL
  • Ambient operating temp: 0°–40° C (32°–104° F)
  • Fan (controllable)
  • Droop compensation
  • 24.8 dBa average at 1 m (each cell)
  • 307.08 / 303.67 BTUs/hour (RGB-L / DB)
• CONTROLS
  • DMX512 via 5-pin XLR or RJ45 connectors Input method
  • DMX512/RDM
  • 4 modes for footprint
  • RDM configuration
  • UI type: Seven-segment, three-button interface
  • Local control
  • 12 Onboard presets
  • 5 Onboard sequences
  • No onboard effects
  • Fixture-to-fixture control
  • 15-bit virtual dimming engine