The E18SW is a high-performance direct radiation subwoofer with a single, 800W, 18-inch, aluminum frame woofer. It’s designed to produce crushing low-end for live performance with kick-drum and bass in the PA or for high-level, high-energy dance music. A threaded, M20 pole socket and speaker pole are provided for sub/satellite use with any of the E Series two-way models. For portable applications it includes attachment points for four optional casters. The subwoofer’s 4-ohm impedance means that a single woofer can be optimally powered by a less expensive amplifier.
E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.
High output, professional quality sound with 800 W continuous power
E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
Titanium diaphragm for high fidelity and long life
Rugged tour-grade textured paint
Foam-lined perforated steel grill
E18SW includes speaker pole
- Configuration 1 x 18-inch, subwoofer, non-powered
- Frequency Range (-10 dB) 50Hz to 120Hz
- Power capacity: continuous/peak 800 W / 3200 W
- Sensitivity 97dB, 1W@1m
- Ouput (peak SPL @ 1 m) 132dB
- Driver 457 mm (18-inch) driver with 100 mm (4-inch) voice coil
- Nominal Impedance 4Ω
- Cross-over Recommended 80-120Hz LPF
- Input connectors 2x NL4, 1 barrier strip
- Enclosure Rectangular, plywood, black texture paint finish. Four side-mounted handles. Rear panels provision for optional casters. Perforated, powder-coated steel grille with foam lining.
- Mounting and suspension M20 threaded pole-mount socket
- Net weight 43 kg / 94 lbs
- Shipping weight 48 kg / 105 lbs
- Dimensions 590x616x605mm / 23.2x24.2x23.8in
AVShop.ca is a Canadian authorized QSC
There are currently no product reviews.
3-year limited warranty.
Promotional 6-year warranty: For an additional 3 years of warranty on all amplifiers GX, RMX, PLX, PLX2, and on HPR and K Series powered loudspeaker products, register on the QSC web site. http://www.qscaudio.com/warranty/warrantyinfo.htm