Free shipping on most orders over $199!

DBX DriveRack 4820 Loudspeaker Management System

Model: DriveRack 4820

DBX DriveRack 4820 Loudspeaker Management System
  • No Longer Available at 
  • Not yet reviewed
Not Available

About: DBX DriveRack 4820 Loudspeaker Management System

Loudspeaker Management System The 4820 includes four inputs and
eight outputs with both analog and digital connectivity. The 96 kHz
processing engine is capable of offering insert processing functions to
customize the processing path for your application, in addition to the
standard system processing functions all with extremely low latency
and extended frequency response. From Signal Routing, EQ, and
Bandpass Filters, to classic dbx® Dynamics and Feedback Suppression.
No LCD display

  • 48 and 96 kHz operation
  • 4 analog and AES/EBU inputs
  • 8 analog and AES/EBU outputs
  • Full Bandpass Filters, Crossover and Routing Configurations with Bessel, Butterworth, and Linkwitz-Riley filters
  • 31-Band Graphic and 9-band Parametric EQ on every input
  • 6-band Parametric EQ on every output
  • Loudspeaker Cluster and Driver Alignment Delays
  • Selectable DSP inserts on all inputs and outputs including Classic dbx Compression, Limiting and Advanced Feedback Suppression among others
  • Ethernet HiQnet™ networking control
  • Optional dbx ZC wall panel control
  • Optional Jensen® I/O Transformers


Number of Inputs: 4 Connectors: Female XLR Type: Electronically balanced/RF filtered Impedance:>50k ohm Maximum Input Level: Software selectable for: +28, +26, +24, +22, +20, +18, +16, +14 dBu CMRR: >40 dB typical, >55 dB at 1 kHz

Digital Inputs

Inputs: (4) AES/EBU Channels Connectors: Female XLR Type:Transformer Isolated, RF filtered Impedance:>110 ohms

RTA Inputs

Input: (1) Analog Connectors: Female XLR Gain Range : 10dB to 50dB in 10dB increments

Analog Outputs

Inputs:8 Connectors: Male XLR Type: Electronically balanced, RF filtered Impedance: 30 ohms Max Output Levels: Software selectable for: +24, +22, +20, +12, +8, +4 dBu

Digital Outputs

Outputs: (8) AES/EBU Channels Connectors: Male XLR Type: Transformer Isolated, RF filtered Impedance: >110 ohms

A/D Performance

Type: dbx Typve IV™ Converstion System Dynamic Range : >114 dB unweighted, 116dB A-weighted Type IV™ dynamic
range: 128dB with transient material, A-weighted, 22kHz BW 126 dB with transient material, unweighted, 22 kHz BW 120 dB typical with program material, A-weighted, 22 kHz BW Samle Rate: 96kHz A/D Wordlength: 24 bits

D/A Performance

Dynamic Range: 112 dB unweighted, 115 dB A-weighted Sample Rate: 96kHz D/A Wordlength: 24 bit

System Performance

Dynamic Range: 112dB unweighted, 115dB A-weighted Internal Processing: 32 bit floating point THD + Noise: 0.004% typical at +4 dBu, 1 kHz, 0 dB input gain Frequency Response: 20 Hz- 40 kHz, +/-0.5 dB Interchannel Crosstalk: <-85 dB at 1 kHz, 0 dB input gain


Pre EQ Type: One 31-band Graphic EQ on each input One EQ that is switchable between 31-band and 9-band Parametric on each input Range: +/- 12dB Input Insert Procssing: Two selectable Insert Processing blocks per input Type: Noise Gate, Compressor, Auto Gain Control, De-Esser, Sub-Harmonic Synth, Advanced Feedback Suppression Input Delay Length: Up to 682 mSec available Routing/Mixing: 4-input mixer available at each output allowing any input to be sent or mixed to any output Output Insert Procssing: Two selectable Insert Processing blocks per output Type: Noise Gate, AutoWarmth®, Compressor, Auto Gain Control, Peak Limiter, Sub-Harmonic Synth, Advanced Feedback Suppression X-Over Filter Configs: 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2, 2x3, 2x4 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6, 3x7, 4x4, 4x5, 4x8 Type: Bessel 6, 12, 18, and 24 dB per Octave Butterworth 6, 12, 18, and 24 dB per Octave Linkwitz-Riley 12, 24, 36, and 48 dB per Octave Polarity: Positive and Negative Phase Control: 0 to -180 degrees in 5 degree increments Output Delay Length: 1365 mSec shared between the outputs


I/O Transformers: Optional Control: Ethernet, RS-232, Optional dbx ZC Wall Panels Power Requirements: 100V to 240V 50/60Hz, 45 Watts Dimensions: 3.5"x19"x12.15" Weight: 11 lbs.
Shipping Weight: 12.5 lbs.


UPC: 691991400896 is a Canadian authorized dbx retailer.

Reviews: DBX DriveRack 4820 Loudspeaker Management System

There are currently no product reviews.

Warranty: DBX DriveRack 4820 Loudspeaker Management System Warranty:

30 Days

Manufacturer's Warranty:

Soundcraft, Lexicon, BSS, and dbx products are warranted to be free from defects of material and workmanship for 1 year from the date of delivery to the original user. Repairs will be undertaken at no cost for labor or materials within this time period.

Others Purchased With

More Items from System Processors

More Items from dbx