The XR-1001 Crossover is based upon a powerful state-variable filter circuit guaranteeing that two adjacent frequency band outputs always remain in phase. Conservative design and an unusually thorough procedure for quality control have earned Ashly has reputation for dependability in the recording, sound reinforcement and = broadcast fields.
The XR-1001 offers a number of useful features, including continuous tuning, a response control, and a unique output stage that maintains low noise at any level setting. The XR-1001 also include a 200:1 tuning range, individual output mute switches, and both TRS and XLR connectors. This control adjusts the damping of the filter affecting the response shape of
the filters at the crossover point. This helps offset the inaccuracies inherent in typical loudspeakers, thereby helping
you to achieve a flat system response.
Dial calibrations refer to the amount of attenuation effected by the filter at the crossover frequency, i.e., a setting of 3dB means that the filter’s hi-pass and low-pass outputs are each “rolled off 3dB at the crossover point”. This describes Butterworth filter response, or a gentle 3dB peak at the crossover point when the two filter output signals overlap.
To obtain a flat signal, or “Linkwitz-Riley” response through the crossover region, set the Response control to “6”. This attenuates each output of the filter by 6dB at the crossover point (two identical signals added together yield a +6dB increase). To obtain a notch at the crossover point, turn down the response control past “6” to best suit your needs.
Like other Ashly products, the XR-1001 features low noise and distortion, active balanced inputs, a peak level indicator, a precision regulated power supply, protection against abnormal input or output conditions, and rugged mechanical construction.
- Variable Filter Response Control
- 24dB/octave slope
- Mode switch for stereo 2-way or mono 3-way operation
- Low frequency summed mono output
- +/-10 range switch on both channels
- XLR and 1/4” inputs and outputs
- 20Hz third-order hi-pass filter
- Peak overload warning lights
- Individual level control and mute switch on all outputs
- Active-balanced inputs
- Servo-balanced outputs
- XLR and TRS 1/4” connectors
- Universal 100–240VAC internal power supply
- Safety/Compliance: cTUVus, CE, FCC, RoHS
AVShop.ca is a Canadian authorized Ashly