The new design of the PA6S includes the convenient mic stand insert on the bottom of the unit. This allows a quick setup on top of a mic stand, with the PA6S angled upward for accurate vocal monitoring. The included mic stand adaptor insures a more stable and secure placement on any mic stand. Molded-in yoke bracket points. With the optional yoke bracket assembly the PA6S can be mounted to a wall or ceiling, or attached to a mic stand and angled in any direction.
Microphone boom mount on top of the PA6S eliminates the need for a second mic stand for your microphone. (Requires optional hardware).
Built in Compressor/Limiter prevents output distortion.
-20dB pad switches on each XLR input allow high-level signals without distortion.
3 band EQ (High, Mid, Low) to adjust the sound to what you want to hear.
Pass through on each channel acts as a built in splitter to send signals to a mixer snake or another PA6S.
Two way speaker system: 6.5" neodymium high power woofer and 1.5" high efficiency Neolite tweeter allows for wider frequency response.
Lighter weight: Innovative speaker and amplifier designs actually allowed us to reduce the weight of the PA6S from its predecessors, while improving the performance.
- · 2-Way Speaker System
- · 6.5" Neodymium Woofer
- · 1.5" Titanium Dome Tweeter
- · 170 Watt Amplifier
- · 3 Inputs (2-XLR/1/4" Combos, One 1/8")
- · Mounts to Any Mic Stand
- · Integrated Handle, Mounting Points for Mic Boom & Bracket
- · Built In Compressor/Limiter
- · XLR Pass Thru On Channels 1 & 2
- Woofer: One Galaxy Audio SW6.5 ferro fluid cooled 6.5" NEOLITE Neodymium Woofer
- Tweeter: One ST1.5 fluid cooled 1.5" NEOLITE Neodymium Titanium Dome Tweeter
- Nominal impedance: 4 ohms
- Power handling capacity: 155 watts
- Rated Power: 170 watts @ 4 ohms, 180 watts Dymamic Power
- Equalization: Three band center detent
- Lo: ± 12 dB peak/dip at 200 Hz
- Mid: ± 12 dB peak/dip at 2 kHz
- Hi: ± 12 dB shelving at 10 kHz
- Sensitivity (1 Watt @ 1 meter): 98 dB (1 kHz octave band)
- Frequency response: 80 Hz–18 kHz
- Maximum SPL @ clip: 118 dB
- Total Harmonic Distortion: <0.5% @ 4 ohms
- Input connections: Two 1/4" Balanced/Unbalanced Two XLR 24V Phantom PWR One 1/8" Stereo Line In
- Output connections: Two XLR Thru Outputs One 1/4" Preamp Output
- Indicator LEDs: POWER, CLIP & COMPRESSOR
- Power Requirements; Domestic: 120 VAC 60Hz
- Export: 230VAC 50Hz
- Safeguards: Short circuit current limiting. Short circuit foldback limiting. Thermal short circuit protection
- Enclosure Materials: Fire retardant styrene
- Color: Black
- Dimensions: 7.75" x 11.75" x 6.75" (197 mm x 298 mm x 171 mm)
- Net weight: 6.4 lbs. (2.9 kg)
AVShop.ca is a Canadian authorized Galaxy Audio