Free shipping on most orders over $199!

Stealth Acoustics LR6g 6.5in Invisible Speaker (Pair)

Model: LR6g

  • Free Shipping!
  • Usually Ships in 7-10 Days 
  • Not yet reviewed

About: Stealth Acoustics LR6g 6.5in Invisible Speaker (Pair)

The Stealth Acoustics model LR6G is a two-way, full-range loudspeaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame that attaches directly to standard structural framing. The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area. Installation instructions are shown on a paper overlay that is to be removed before installation. The overlay can also be used as a cutting template for retrofitting the speakers into existing wallboard.

The LR6G may be installed in either the wall or ceiling and on-site finishing options include latex paint, light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials. Advanced finishing methods such as Venetian plaster and select veneers are supported using special techniques.

The Stealth Acoustics LR6G incorporates an acoustically coupled high quality, high-power 6.5” cone woofer and a direct coupled 30 mm neo-magnet high-frequency motor. Advanced internal carbon fiber materials allow for smooth frequency extension to 20kHz. When the LR6G is installed in standard insulated 2” x 4” framing and allowed to function in a full 8 foot stud bay, frequency response below 45Hz can be achieved. The LR6G contains two independent protection circuits (high-frequency and low-frequency sections) that automatically reset upon reduction of excessive amplifier power.


  • Frequency Response: 45Hz to 20kHz
  • Power Capacity: 100 watts RMS
  • 50 watts minimum recommended power
  • Protection: Two independent self-resetting devices (low and high frequency)
  • Sensitivity: 83 dB (1 watt / 1 meter)
  • Driver Components:
    • High frequency: 1” (30 mm) neodymium motor
    • Low-frequency: 1” (25 mm) voice coil, 6.5” (165 mm) woofer
    • Ceramic 20 oz. (622 gr) magnet
  • System Impedance: 8Ω nominal
  • Polar Dispersion: 170 degrees vertical and horizontal
  • Dimensions:
    • Width: 15-7/8” (403 mm)
    • Height: 11-7-8” (302 mm)
    • Mounting Depth: 2-1/4” (58 mm)
  • Product Weight: 8.7 lbs. (3.9 kg) each
  • Shipping Weight: 19 lbs. (8.6 kg) per pair
  • Included Accessories:
    • Mounting shims
    • Mounting screws
    • Terminal wrench
  • Optional Accessories:
    • PS-12 PlaceSaver®
    • BX-12 MDF Acoustic Back Box
    • MBX-12 UL Listed Metal Back Box
    • MBA-22 UL Listed Metal Back Box – Adjustable
    • MBC-22 Concrete Back Box
    • SK-1 Shim Kit
    • CVXMR 100, 75 and 25 volt Constant Voltage Transformers
  • WARRANTY – Extended Warranty 15 year is a Canadian authorized Stealth Acoustics retailer.

Reviews: Stealth Acoustics LR6g 6.5in Invisible Speaker (Pair)

There are currently no product reviews.