The Radial mPress is a modular press box that can be expanded as needed to feed a community-sized press gallery or distribute audio for an international event.
The design begins with the mPress, a master head distribution amplifier that is equipped with two microphone inputs, 48V phantom power for condenser microphones and a built-in limiter to prevent overload from overly rambunctious orators. Eight balanced mic outputs may be used to supply feeds to a small press gathering. For larger system requirements, a series of modular Exo-Pods may be deployed. These external modules are connected using standard mic cables and feature ten balanced mic outputs and four mini 3.5mm TRS connections to feed portable recorders or hand-held video cameras. In order to eliminate hum and buzz caused by ground loops, stray DC currents and less than ideal powering systems, all outputs are transformer isolated.
The mPress’s modular approach replaces the spaghetti of cables that usually hampers setups with an orderly system than enables one to create zones for various groups. From each of the mPress XLR outputs as many as four Exo-Pods may be chained together, for a total of 320 microphone and 128 recorder outputs. A built-in 1kHz test tone provides everyone with a reference level and the built-in headphone amplifier helps when trouble shooting. To simplify setups, a main stereo output is available to feed a pair of powered speakers and broadcast the event to an audience. Separate audio inputs also enable the mPress to play background music while waiting for the guest speaker to appear.
- Modular press box with up to 448 outputs
- Completely analog, no digital trickery!
- Active drive with transformer isolation to eliminate noise
- Can play background music when on standby
AVShop.ca is a Canadian authorized Radial Engineering
There are currently no product reviews.
All products sold by Radial come with a 1-year limited warranty that is detailed in the product's specific owner's manual. This limited warranty protects you against defects in workmanship. The warranty does not cover any consequential or inconsequential damage or any losses.
Some Radial products come with a 3-Year Transferable Warranty. This means that if you buy the product and decide to sell it, the warranty can be transferred to the person that buys it from you, thus providing continuous warranty support and added value. This Transferable Warranty follows the same procedures and limitations outlined in the Standard Warranty. This means that if you sell the product, you must provide the buyer with a copy of your original invoice so that he, in turn, may be able to submit this should a warranty claim be required.