Free shipping on most orders over $199!

Clear-Com MS-702 2-Channel Headset/Speaker Main Station

Model: MS-702

Clear-Com MS-702 2-Channel Headset/Speaker Main Station
Clear-Com MS-702 2-Channel Headset/Speaker Main Station
  • Free Shipping!
  • Usually Ships in 2-3 Days 
  • Not yet reviewed

About: Clear-Com MS-702 2-Channel Headset/Speaker Main Station

The Clear-Com MS-702 is a compact, feature-laden, single rack-space intercom main station supports up to 40 RS-701 beltpacks, 10 speaker stations or 12 headset stations on two channels.  It features Clear-Com's excellent speech intelligibility in both high- and low-noise environments.

Monitoring System
The MS-702 can monitor intercom activity on one or both channels with individual listen-level controls. Monitoring intercom activity is possible through a headset or the internal loudspeaker. The high-sensitivity internal speaker provides intelligible communication in the typical active production environment.

Talk Selection
The MS-702 contains mic preamps with limiters, and speech-shaping circuits for enhanced intelligibility. An individual electronic momentary/latching talk button is provided for each channel. These buttons light dimly when latched - blue-color LED while in stand-by and amber-color LED when latched. The channels may be accessed separately or simultaneously without tying them together. An optional gooseneck mic is available.

Announce Output
For paging applications, the MS-702 provides a balanced, line-level output signal to a 1/4" TRS connector on the rear panel. The front panel "Announce" button activates the output and the Announce relay. The relay circuit, on a separate 1/4" TRS connector, is typically used to mute control-room monitors during live announcements.

Visual and Audible Signaling
Visual "call" signaling attracts the attention of operators who have removed their headsets or turned off their speakers. Call buttons for each channel signal all stations on that party line by flashing brightly. Along with the visual signal, the station's speaker will emit an audible signal if the remote station operator holds the Call button for more than 2 seconds.

Remote Mic Kill (RMK)
The MS-702 is equipped with a global RMK button. It will turn off the microphone talk circuits of all Clear-Com beltpacks in the system, eliminating extraneous noise from the "open" headset microphones.

Program Input
The MS-702 accepts a line-level external program input for monitoring in the headset and speaker, and/or mixing with intercom audio on either or both channels. When Interrupt is selected, the program signal is interrupted when the Talk button is pressed.

Power Supply & System Protection
The MS-702 provides visual indication of power supply conditions. In the event of a short circuit or current overload on a channel, that channel will shut down while the other one continues to operate. As soon as the fault condition is removed, the "auto-reset" circuitry will restore power to that channel - even under full load conditions.

Simple Set-Up
The MS-702 connects to remote stations with standard, two-conductor shielded mic cable. User-selectable setup dip switches are provided on the rear panel.


  • Supports up to 40 beltpacks or 10 speaker stations on two channels and 12 headsets
  • Separate short-circuit protection for each channel
  • Dual-action electronic momentary/latching "talk"buttons
  • Program feed to both channels, with selectable "Program Interrupt" (IFB)
  • "Call" signal buttons for each channel
  • Global "Remote Mic Kill"
  • Announce output with relay
  • Microphone limiting
  • Volume controls for each channel
  • Visual and audible "Tone Alert" signaling
  • Channels A & B "Link" switch
  • Built-in speaker
  • Optional gooseneck mic
  • External switchable line termination on each channel
  • Universal voltage power supply for 100-240 VAC operation is a Canadian authorized Clear-Com retailer.

Reviews: Clear-Com MS-702 2-Channel Headset/Speaker Main Station

There are currently no product reviews.

Warranty: Clear-Com MS-702 2-Channel Headset/Speaker Main Station Warranty:

30 Days

Manufacturer's Warranty:

All Clear-Com brand systems and products, including wired and wireless belt packs, have a Limited Warranty of two years, with the following exceptions:

  1. Clear-Com headsets, handsets, microphones, UHF wireless IFB products, and the following DX and PRO products: AC850 Charger, BAT850 Battery, BAT41 and BAT850 batteries, HS12, headsets, remote antenna cables, SP10 Speaker, XLR Adapters and HS20-2 headsets have a Limited Warranty of one year.
  2. Cables, accessories, components and consumable items including the BP850 battery sled, Beltpack antennas, Beltpack configuration cable, HS4-2 Earpiece, RMK850 Mounting Kit, RAK850 Remote Kit, Beltpack pouch, DX headset extension cable, HS4-3 Earpiece, HSI6000, RMK200, Splitter/Combiner, WS200 Battery Sled, Foam inserts in travel case, CAT-5 cable, base antenna have a Limited Warranty of 90 days.
  3. Any Clear-Com product that has been classified as obsolete at the time of sale has a Limited Warranty of 90 days from sale and will be replaced with the same product or a sales credit will be issued, at the sole discretion of Clear-Com. 
  4. Clear-Com PRO 850 series wireless base station and Beltpacks have a Limited Warranty of three years.
  5. Clear-Com UHF WBS Analog wireless intercom systems have a Limited Warranty of three years.
  6. All software products, including Concert (Client and Server), ECS, EHX, Production Maestro Pro and Logic Maestro are warranted for one year and shall substantially conform to published specifications. The media on which the Software is furnished is warranted to be free of defects in material and workmanship (under normal use) for a period of one year.

Others Purchased With

More Items from Stations & Power Supplies

More Items from Clear-Com