Free shipping on most orders over $199!

Clear-Com PS-702 2-Channel 2-Amp Power Supply

Model: PS-702

Clear-Com PS-702 2-Channel 2-Amp Power Supply
Clear-Com PS-702 2-Channel 2-Amp Power Supply
Clear-Com PS-702 2-Channel 2-Amp Power Supply
  • Free Shipping!
  • Usually Ships in 2-3 Days 
  • Not yet reviewed

About: Clear-Com PS-702 2-Channel 2-Amp Power Supply

The PS-702 can deliver 1.2 amps at 30 volts DC to two channels. This is sufficient to power up to 40 beltpacks, 10 speaker stations, or 12 headset stations even under the most demanding conditions. Either channel is capable of supplying up to 1.2 amps. The full current capacity may be divided between the two channels.

Clear-Com’s advanced fail-safe design can sense the dierence between a short and an overload. Should a problem occur, each channel’s DC overload/fault LED identies the power supply’s response to the problem: solid means an overload is sensed, but still powered; blinking means power has been temporarily cut o to protect the power supply. If both channels are operating and one channel has a fault, the other channel will continue to operate normally. Power is restored to the shorted or overloaded channel in a little as .5 seconds. With our exclusive Intelligent Fault/Overload Sensing (IFOS), the PS-702 will dynamically increase this time period before attempting another reset until the fault or overload is corrected. This function signicantly extends component life. And there is no need to disconnect stations for the power supply to reset.

The unit also oers a convenient front panel in tercom line jack, switchable to either channel. This can be quite handy for t rouble-shooting or simply a time saver when quick access to e ther i intercom line is needed. A 440Hz tone is available on either or both channels and is indispensable for system diagnostics and set-up. Simply ip a switch, set a level, and go.

Like all current Clear-Com Party-Line power supplies, two or more units can be connected in parallel for increased system capacity or backup redundancy. Multiple units will automatically synchronize their response to power faults and overloads. The PS-702 can also operate as a singlechannel unit by using the front-panel A+B link switch. 


  • Provides up to 2 amps in only 1RU •
  • Supports up to 40 beltpacks, 10 speaker stations or 12 headset stations
  • Exclusive IFOS Intelligent Fault/ Overload Sensing for system reset
  • Front panel intercom line jack selectable for either channel
  • A+B Link switch for single channel operation
  • Balanced program input with global and individual channel controls
  • Universal power supply accepts 100-240 VAC
  • Overload/fault indicator for each channel
  • Built-in test tone generator for set up and diagnostics
  • Switchable terminations for each channel
  • Works in parallel with other power supplies and main stations
  • UL Listed and CE certified is a Canadian authorized Clear-Com retailer.

Reviews: Clear-Com PS-702 2-Channel 2-Amp Power Supply

There are currently no product reviews.