Menu

Free shipping on most orders over $199!

Radial StageBug SB-48UB Phantom Power Supply with Instrument Output

Model: SB-48UB Phantom

Radial StageBug SB-48UB Phantom Power Supply with Instrument Output
  • Free Shipping on orders over $199
  • Usually Ships in 7-10 Days 
  • Not yet reviewed




About: Radial StageBug SB-48UB Phantom Power Supply with Instrument Output

The Radial SB-48UB is a unique 48V phantom power supply that enables the artist to power a condenser microphone and then send the balanced signal into the unbalanced signal into a stage amplifier or effect pedal like a Radial PZ-DI acoustic preamp.

The challenge when using a condenser microphone with a preamp pedal, direct box or stage amp is that most of these only have balanced inputs. And as most phantom power supplies are only equipped with balanced inputs and outputs, making a proper connection is often difficult or impossible due to the impedance and level mismatch.

The SB-48UB is a single channel phantom power generator that converts the power from a 15VDC supply to 48 Volts for use with a condenser microphone or active direct box. Inside, the SB48-UB converts the signal to both a lo-Z balanced XLR output and a hi-Z unbalanced ¼" out. Both outputs may be used concurrently whereby the XLR could feed the PA while the ¼" out could feed a stage amp or pedalboard



AVShop.ca is a Canadian authorized Radial Engineering retailer.

Reviews: Radial StageBug SB-48UB Phantom Power Supply with Instrument Output

There are currently no product reviews.


Warranty: Radial StageBug SB-48UB Phantom Power Supply with Instrument Output

AVShop.ca Warranty:

30 Days

Manufacturer's Warranty:

All products sold by Radial come with a 1-year limited warranty that is detailed in the product's specific owner's manual. This limited warranty protects you against defects in workmanship. The warranty does not cover any consequential or inconsequential damage or any losses.

Some Radial products come with a 3-Year Transferable Warranty. This means that if you buy the product and decide to sell it, the warranty can be transferred to the person that buys it from you, thus providing continuous warranty support and added value. This Transferable Warranty follows the same procedures and limitations outlined in the Standard Warranty. This means that if you sell the product, you must provide the buyer with a copy of your original invoice so that he, in turn, may be able to submit this should a warranty claim be required.