The ULTRA-DI DI600P is a passive DI (Direct Injection) box for connecting a guitar, bass or keyboard directly to your mixer. With the DI600P as your go-between, impedance-matching problems become a thing of the past, and long cable runs will not sacrifice all of your precious tone.
With its parallel 1/4" IN and OUT jacks, the DI600P allows you to plug in your instrument and send the same signal to your onstage amplifier, while the XLR OUTPUT sends a balanced signal to your mixer. A ground lift switch eliminates hum associated with ground loops and our high-performance transformer provides the ultimate in signal integrity.
Just flip the INST/AMP switch and the DI600P can easily accommodate either the low-level signal of a high-impedance mic or guitar (INST mode), or the speaker output of a guitar amplifier (AMP mode). Even if your amp cranks out as much as 3,000 Watts, you get a perfect signal every time!
Connect your guitar or bass directly to your mixer without losing tone due to impedance mismatches, long cables and cycle hum
Converts any unbalanced line-level signal to balanced mic-level output
Provides impedance and signal matching for the direct connection of instruments to amplifiers and mixers
Allows the use of long cables without losing high frequencies
Thru/Out jack lets you send the unbalanced signal to an onstage amplifier while the balanced signal is routed to the mixer
Switchable input for connecting instruments or amplifiers with outputs up to 3,000 Watts
Filter switch reduces annoying hiss and buzz
Ground lift switch eliminates typical ground loop problems such as hum
High-performance transformer for ultimate signal integrity
Ultra-compact, all-metal and road-suitable housing
High-quality components and exceptionally rugged construction ensure long life and durability
Conceived and designed by BEHRINGER Germany
AVShop.ca is a Canadian authorized Behringer
There are currently no product reviews.
BEHRINGER and BUGERA products sold in Canada are covered under the MUSIC Group Limited warranty as described on www.behringer.com/support and www.bugera-amps.com/support.
BEHRINGER AND BUGERA products are warranted to be free from defects in materials and workmanship for a period of 12 months from date of purchase from a Canadian retailer, unless a different period is stated in the Owner’s manual. Some exclusions may apply.
To obtain warranty service the product must be returned along with a proof of purchase from an authorized Canadian dealer using the following procedure:
- Contact MUSIC Group by one of the following means:
- On the web, for BEHRINGER products at www.behringer.com/support and for BUGERA products at www.bugera-amps.com/support.
- By telephone 1-425-939-3299
- You will be issued a return authorization number along with specific instructions on where to send or deliver your defective product.
- Securely pack and label the product with the return authorization number clearly on the exterior of the carton. Cartons without this number will be refused. Any product hand delivered to a service depot does not require packaging.
You will be notified by the service depot when your product has been repaired and it will be sent to your address on file or await pickup if hand delivered. Warranty repairs are generally completed within 21 days.