The Glaciator X-Stream creates a total, ground fog effect from a self-contained unit. The Glaciator X-Stream utilizes the simple but effective Jem heavy fog fluids and a closed loop refrigeration system for a heavy fog solution.
The Glaciator X-Stream houses a remarkably powerful compressor, allowing colossal fog output levels. And because of its advanced, electronically controlled expansion valve, it has a rapid freeze down time and a fast recovery when fired. This means the Glaciator X-Stream runs continuously, - almost infinitely, with a cool ease.
Its chassis design; with two high velocity fans and smart-flow ventilation, also keeps the Glaciator X-Stream ticking in environments of high ambient temperatures. And keeping an eye on internal components is done with an unparalleled simplicity using the Glaciator X-Stream’s Internal Diagnostic Assistance.
Featuring a Power Save System when passive, The Glaciator X-Stream is conscientiously efficient with energy and sound, and its cooling fans have a low noise operation when idle, benefiting theatrical and Studio applications.
The Glaciator X-Stream also has the option of an external fluid supply; allowing voluminous levels of heavy fog fluid to be stored up to 100 meters away from the unit and at a depression of up to 6 meters.
Where silence is golden and space is rare, the Glaciator X-Stream’s remote ducting system allows you to place the unit up to 10 meters away from its application area. A great solution, the remote access system does not in any way compromise the Glaciator’s X-Stream fog output density!
* Density control: low, medium or high
* Continuous output
* 80 m2/min fog output
* 3500 W heat exchanger
* 15 min heat-up time
* 5 liter fluid capacity
* Different fluid options for different applications
* Internal or external fluid supply
* Low fluid sensing
* Self contained unit: no C02 or dry ice
* Onboard DMX
* On-board control panel
* Optional ducting system
Length: 866 mm (34.1 in.)
Width: 638 mm (25.1 in.)
Height: 725 mm (28.5 in.)
Dry weight: 110 kg (242.5 lbs.)
Coverage volume: 80 m2 per minute
Operating time: Continuous, automatic level adjustment
Warm-up time (approx.): 15 minutes
Control and Programming
Control options: Onboard control panel, DMX
Compatible remote controls: For limited control
DMX channels: 2 (output and compressor)
Protocol: USITT DMX512/1990
Housing: Steel & aluminum
Heat exchanger: 3500 W, direct thermal protection
Fluid pump: Oscillating piston, high pressure X2
Onboard fluid capacity: Internal 5 l reservoir
External fluid supply: For larger volume remote fluid supply
Fluid consumption at peak output: 120 ml per minute
Orientation: Floor mount only (On wheels)
Remote control: 3-pin locking XLR
DMX data: 3-pin locking XLR
Power cable entry: IEC-EN60309-2 Socket (Cee Type)
AC power (EU models): 220-240 V nominal, 50 Hz
Main fuse (220-240 V power): Onboard 32 A Breaker
AC power (US models): 208 V, 60 Hz
Main Fuse (208 V power): Onboard 32 A Breaker
Maximum ambient temperature (Ta max.): 40° C (104° F)
Exterior surface temperature, steady state: 50° C (122° F)
Max. nozzle temperature: 200° C (392° F)
AVShop.ca is a Canadian authorized Jem