Jem K1 Hazer

• All Products by Jem
• Other Hazers by Jem

The Jem K1 Hazer is Martin’s top-of-the-line hazer for high performance applications where a high level of reliability and easy serviceability is required. Feature-rich and of solid construction, the Jem K1 provides the ideal combination of continuous operation, long hang time, and low fluid consumption for greater economy.

Features

* Designed for service ease
* Continuous output
* Output and density level control
* 5000 m³/min haze output
* Integrated high velocity fan (variable fan speed)
* 600 W heat exchanger
* 2.5 liter fluid capacity
* Low fluid consumption and longer hang-time for greater economy
* Water based - no oil residue on light fixtures
* Automated shut-down procedure to prevent clogging
* On-board DMX, 3 & 5 pin
* On-board control panel
* Fast access set-up mode
* Optional digital remote control
* Silent Mode
* Eco mode extends run time and improves fluid economy

Physical
Length: 544 mm (21.4 in.)
Width: 459 mm (18.1 in.)
Height: 344 mm (13.5 in.)
Dry weight: 21.5 kg (47.4 lbs.)

Performance
Coverage volume: 5000 m3 per minute
Max. operating time at full output (approx.): 17 hours
Operating time: Continuous, automatic level adjustment
Warm-up time (approx.): 5 minutes

Control and Programming
Control options: Onboard control panel with 4-digit display
Control options: Instant or timer-controlled output, 0-100% adjustable output level
Control options: Adjustable Fan Speed Level
DMX channels: 2 (output and fan)
Optional digital remote control: 92765036

Construction
Housing: Steel & aluminum
Heat exchanger: 600 W, direct thermal protection

Fluid System
Fluid pump: Oscillating piston, high pressure
Onboard fluid capacity: 2.5 l
Fluid consumption at peak output: 140 ml per hour
Compatible Fluids: K1 Haze Fluid

Installation
Orientation: Floor or flying kit

Connections
Power connection: Neutrik powerCON
DMX data: 3-pin and 5-pin XLR sockets
Remote control: 3-pin locking XLR

Electrical
AC power (EU models): 220-240 V nominal, 50 Hz
AC power (US models): 110-120 V nominal, 60 Hz
Main fuse (220-240 V power): 5 AT
Main fuse (110-120 V power): 10 AT

Thermal
Maximum ambient temperature (Ta max.): 40° C (104° F)
Exterior surface temperature, steady state: 40° C (104° F)
Max. nozzle temperature: 200° C (392° F)