Martin Magnum 850 Fog Machine

• All Products by Martin
• Other Fog Machines by Martin

The Magnum 850 is the perfect fog machine for small nightclubs, mobile DJs and bands. Compact and lightweight, it offers substantial cost and maintenance benefits over a long operational life.

The compact Magnum 850 uses a 750 W heat exchanger together with a high-quality piston pump to effortlessly punch out a full 200 m³/min of dense fog. It heats up fast and is continuously operational for a trouble-free ‘set it and forget it’ effect.

Rugged yet lightweight
The delivery of a continuous and even level of fog and the incorporation of soft-start electronics means that the Magnum 850 operates at a very low noise level. Built rugged yet lightweight and conveniently portable, the Magnum 850 offers substantial cost and maintenance benefits over a long operational life.

Remote control
Supplied with a remote control and featuring the same machine-saving overheat protection as Martin’s larger machines, the economically-priced Magnum 850 will provide years of maintenance-free operation. An optional timer remote is also available.

Fluid options
The Magnum 850 has a one liter fluid capacity, and a variety of fluid options are available for different applications. Martin offers the widest range of atmosphere-generating fog fluid around. Specially formulated and water-based, all fluids are effective, safe, and economical.

Features

* Continuous output
* 200 m³/min fog output
* 750 W heat exchanger
* 8 minute heat-up time
* 1 liter fluid capacity
* Different fluid options for different applications
* Housing: Steel and aluminum
* Hand-held remote control
* Timer remote control (optional)

Physical
Length: 409 mm (16.1 in.)
Width: 165 mm (6.5 in.)
Height: 186 mm (7.3 in.)
Dry weight: 9.9 kg (21.8 lbs.)

Performance
Max. fog output (approx.): 200 m3 per minute
Max. operating time at full output (approx.): 80 minutes
Operating time: Continuous, automatic level adjustment
Warm-up time (approx.): 8 minutes

Control and Programming
Control options: Remote control (supplied)
Remote control features: Manual switch

Construction
Housing: Steel & aluminum
Heat exchanger: 750 W, direct thermal protection

Fluid System
Fluid pump: Oscillating piston, high pressure
Onboard fluid capacity: 1 l
Fluid consumption at peak output: 35 ml per minute

Installation
Orientation: Floor

Connections
Remote control: RJ-45
Power connection: 3-pin IEC male socket

Electrical
AC power (EU models): 220-240 V nominal, 50 Hz
AC power (US models): 110-120 V nominal, 60 Hz
Main fuse (220-240 V power): 6.3 AT (slow blow)
Main fuse (110-120 V power): 10 AT (slow blow)

Thermal
Maximum ambient temperature (Ta max.): 40° C (104° F)
Exterior surface temperature, steady state: 40° C (104° F)
Max. nozzle temperature: 200° C (392° F)