Menu

Free shipping on most orders over $199!

AVShop - 2in Clamp to Pipe Adapter

AVShop ClampPipe

AVShop - 2in Clamp to Pipe Adapter
AVShop - 2in Clamp to Pipe Adapter
  • Shipping Charges Apply
  • Usually Ships in 2-3 Days 
  • Not yet reviewed




Package Includes:

1 x ProBurger 2in Aluminum Half-Coupler w/ 3/8in Bolt      (Model: PRBHC3/8)
In Stock - Ship or Pick-up
1 x The Light Source MP1.5B.5M Mega-Coupler Pipe Adapter      (Model: MP1.5B.5M)
In Stock - Ship or Pick-up

AVShop - 2in Clamp to Pipe Adapter

The Pipe to Coupler Adapter can be used to rig pipe mounted plasma screens, projectors and speakers from overhead pipe or truss. Special versions are available with cable holes through the side to run power and signal cables inside the vertical pipe. The Pipe to Coupler Adapter attaches a standard threaded 1-1/2" pipe (1.9" OD) to a Mega-Coupler. There are two interlocking tabs to keep the adapter from rotating. The Adapter is fastened to the Mega-Coupler with a 1/2"-13 tpi by 1" long bolt and a jam nut. There is a 1/4-20 set screw to lock the pipe rotation, and an inspection hole to verify that the pipe is fully inserted.

 

Comes preassembled with Clamp and adapter - pipe not included


ProBurger 2in Aluminum Half-Coupler w/ 3/8in Bolt


ProBurger couplers are constructed from a certified high tensile-strength 6061 T6 aluminum extrusion. They attach securely to tubes and combine strength and durability with a high degree of safety.

3/8" Mounting Bolt - Natural Finish

500kg S.W.L.

The Light Source MP1.5B.5M Mega-Coupler Pipe Adapter


The Pipe to Coupler Adapter can be used to rig pipe mounted plasma screens, projectors and speakers from overhead pipe or truss. Special versions are available with cable holes through the side to run power and signal cables inside the vertical pipe. The Pipe to Coupler Adapter attaches a standard threaded 1-1/2" pipe (1.9" OD) to a Mega-Coupler. There are two interlocking tabs to keep the adapter from rotating. The Adapter is fastened to the Mega-Coupler with a 1/2"-13 tpi by 1" long bolt and a jam nut. There is a 1/4-20 set screw to lock the pipe rotation, and an inspection hole to verify that the pipe is fully inserted.

*** Does not come with clamp or pipe ***

  • Safe Vertical Working Load: 1100 Pounds
  • Hardware: 1/4″ × .375 Socket Set Screw
  • Weight: 0.8 oz.
AVShop.ca is a Canadian authorized AVShop retailer.

Reviews: AVShop - 2in Clamp to Pipe Adapter

There are currently no product reviews.