American DJ Ultra Bar 6 Package
Easy to transport and setup, this Ultra Bar 6 package has everything you need for uplighting!
American DJ Ultra Bar 6 22in LED Wash Bar
The ADJ Ultra Bar 6 is a 22.5-inch (.5 meter) professional grade indoor linear fixture powered by six 3-Watt TRI (RGB: 3-IN-1) LEDs. Its bright chromatic 40-degree beam angle provides vibrant TRI color mixing designed for washing stages, walls and dance floors. Its rugged casing with patent pending Quick Align end locking allows for a seamless output of light with no breaks of color.
Ultra Bar 6 features built-in Color Macros (built-in colors), 6 DMX Channel Modes, 0-100% dimming and variable speed strobe. Plus, it offers flexible programming from its on-board 4-Button LED DMX-512 menu, or from the ADJ RFC RF wireless remote (sold separately).
• 22.5-inch (.5 meter) indoor Linear Bar with 6 x 3W Ultra bright TRI (RGB: 3-IN-1) LEDs
• Variable RGB color mixing offers a seemingly unlimited color palette - Great for Stage or Wall Washing!
• 7 DMX Channel Modes: 3, 5, 6, 7, 8, 9 or 11 channels
• 6 operational modes: Auto Run, Program Mode, Sound Active, RGB Dimmer, Static Color and DMX-512 Mode
• 3-Section Pixel control
• Patent Pending Quick Align (Magnetic)
• Beam Angle: 40 degrees
• Flicker Free
• 4-Button DMX LED Display
• 35 built-in Color Macros
• LED pulse & strobe effect
• Electronic Dimming: 0-100%
• Includes mounting brackets to mount on a wall or set on the ground
• Compatible with the ADJ RFC remote with RF control up to 30 ft./ 10M (sold separately)
• Long Life LEDs (Rated at approximately 50,000 hrs.)
• Power Draw: 22W
• Linkable: DMX via 3-pin XLR cable; Power via IEC daisy-chain power link (Up to 25 Ultra Bar 6 fixtures)
• Multi-voltage operation: AC 100V-240V 50/60Hz
• Dimensions (LxWxH): 22.5” x 2.5” x 3.75”/ 560 x 63 x 90mm
• Weight: 4 lbs./ 1.6 kg.
American DJ ELAR WR Wireless Remote
Infrared Wireless Controller for Elation Architectural Products • Designed for quick and easy infrared wireless control of Elation Architectural products
• Black Out
• Auto Run Button – Automatically run through all pre-set programs
• Select Program Button – control access to pre-set programs
• Flash Button – Active strobe function
• DMX Mode – Select different DMX channel modes
• Sound active button – Run programs in sound active mode
• Slave Mode – Control in Master/slave configuration
• Set Address – Set DMX addressing
• R, G & B Buttons – Adjust Red, Green & Blue LED values
• Number Buttons – Use to set DMX values
• For use up to 30 feet from fixture
• Dimensions (LxWxH): 4.5” x 2” x .25” / 110 x 46 x 7 mm
Accu-Case F2 Bar Bag
The Accu-Case F2 Bar Bag is a soft padded transport bag designed to carry a variety of modern half-meter bar (linear) fixtures. The bag is divided into two compartments to keep fixtures separate and well-protected. The padded material offers further reassurance that your units won’t be damaged. You may even find that by keeping your fixtures in such good condition, you even make back the money you spent on the bag when you finally sell your fixtures. They will retain more of their value due to their pristine state – so it’s a real worthwhile investment!
We know how crucial the space in your vehicle is. So, for those of you who need to save on room, the Accu-Case bag refrains from being bulky in size. You can safely store your fixtures offering protection without taking up that vital space. Each Accu-Case bag also packs away neatly, taking up little storage space during your gig. You can simply fold the bag up and pack it away. This simple storage solution saves you from paying for bulky solid flight cases, which cost more and use up limited space in your DJ booth. It also means that you’ll never need to leave your cases in your vehicle during a gig. With the Accu-Case bag, you can carry in your fixtures and easily store away your bag.
This padded transport bag isn't just for lighting fixtures. You can fit a variety of cables and clamps by pulling out the dividers. Just compare the size of your lighting fixture to size below to see if your fixture fits.
- Durable padded Gig Bag for transporting lighting, cables, clamps etc.
- Fits up to 2 half-meter Bars (Linear fixtures)
- Padded dividers may be removed to fit other effect lighting, cables, clamps, etc. (see case dimensions)
- Front pockets fit cables and/or controllers
- Inner Bag Dimensions (LxWxH): 22”x6.5”x3.5” / 560x165x90mm
AVShop.ca is a Canadian authorized American DJ
There are currently no product reviews.